S-Tn10 - Flying Lead

#

Passive temperature sensor with flying lead for Vector Controls NTC-type inputs

The S-T measures the temperature by use of a glass packed thermistor with a negative temperature coefficient (NTC). Its resistance changes according to the temperature. The change follows a specified curve.

Applications

  • Measure temperature for heating, ventilation and air conditioning applications
  • As frost protection sensor
  • As input for standard controls equipment
  • Tn10 is the sensor used for Vector Controls NTC inputs

Features

  • Thermistors with negative temperature coefficient for Vector Controls NTC-type inpupts
  • Simple installation
  • Wide range of temperature probes
  • Including 6 ft. (2 m) cable (other cable lengths on request)

Ordering

 Standard sensors

 Item name  Item code  Probe type   Description  Cable length (PVC)
 S-Tn10-2  40-200001  NTC 10kΩ at 77 °F (25ºC)   B25/50: 3935  6 ft. (2 m)
 S-Tn10-6  40-200142  NTC 10kΩ at 77 °F (25ºC)  B25/50: 3935  19 ft. (6 m)

 

Sensors with high temperature cable 

 Item name  Item code Probe type Description Cable length (FEP)
 S-Tn10-2H 40-200154  NTC 10kΩ at 77 °F (25ºC) B25/50: 3935>  6 ft. (2 m)
 S-Tn10-6H 40-200104  NTC 10kΩ at 77 °F (25ºC) B25/50: 3935  19 ft. (6 m)

 

Sensor with plenum rated cable

 Item name  Item code  Probe type  Description  Cable length
 S-Tn10-2P-C  40-200109  NTC 10kΩ at 77 °F (25ºC)  B25/50: 3935, cylindrical sensor tip  6 ft. (2 m)
 S-Tn10-6P-C  40-200110  NTC 10kΩ at 77 °F (25ºC)  B25/50: 3935, cylindrical sensor tip  19 ft. (6 m)

Downloads

Operation Manual

Install Sheet

Application Notes

Certificates

Archive